NI C Series Calibration Procedure

CALIBRATION PROCEDURE
NI 9266
8-Channel C Series Current Output Module
This document contains the verification and adjustment procedures for the NI 9266. For more
information on calibration solutions, visit ni.com/calibration.
Software
Calibrating the NI 9266 requires the installation of NI-DAQmx 18.1 or later on the calibration
system.
You can download NI-DAQmx from ni.com/downloads. NI-DAQmx supports LabVIEW,
LabWindows
™
/CVI
™
, ANSI C, and .NET. When you install NI-DAQmx, you only need to
install support for the application software that you intend to use.
Documentation
Consult the following documents for information about the NI 9266, NI-DAQmx, and your
application software. All documents are available on ni.com and help files install with the
software.
NI cDAQ-9174/9178 USB Chassis Quick Start
NI-DAQmx installation and hardware setup
NI 9266 Getting Started Guide
NI 9266 connection information
NI 9266 Datasheet
NI 9266 circuitry and specifications
NI-DAQmx Readme
Operating system and application software support in NI-DAQmx
LabVIEW Help
LabVIEW programming concepts and reference information about NI-DAQmx VIs
and functions

NI C Series Specifications

General

Brand	NI
Model	C Series
Category	Control Unit
Language	English