To Next PageTo Next Page
Need help?Do you have a question about the NI PXIe-8880 and is the answer not in the manual?
General| Product Type | Embedded Controller |
|---|---|
| PXI 1000BASE-T Ethernet Ports | 2 |
| DisplayPort | 1 |
| eSATA Port | 1 |
| Operating Temperature | 0 °C to 55 °C |
| Series | PXIe |
| USB Ports | 4 |
| Chassis Compatibility | PXIe |
| Dimensions | 3U |
| Storage Temperature | -20 °C to 70 °C |
| Relative Humidity | 10% to 90% (noncondensing) |
| System Memory (RAM) | 8 GB |
Procedure for safely removing the NI PXIe-8880 from its packaging.
Details on voltage and current requirements for the NI PXIe-8880.
Environmental specifications for operating the NI PXIe-8880.
Specifications for the controller's resistance to shock and vibration.
Instructions and guidelines for installing or changing the controller's OS.
Step-by-step guide for physically installing the NI PXIe-8880 into a PXI Express chassis.
Steps to install and configure LabVIEW RT software on the embedded controller.
Explanation of configuration switches for controlling LabVIEW RT boot behavior.
Information on software and drivers included with the system.
Details on the data storage capabilities of the NI PXIe-8880.
Description of the front panel layout and connectors.
Details on using the SMB trigger connector for PXI Express systems.
Explanation of the LEDs on the front panel and their meanings.
Steps to configure PXI Express chassis and identify system components.
Process for identifying and configuring PXI Express chassis and modules.
Procedure for safely removing the NI PXIe-8880 from its chassis.
Guidelines for cleaning the NI PXIe-8880 controller.
Answers to frequently asked questions about system configuration.
How to configure the controller's boot order and devices.
Information on connecting peripherals using various cables and adapters.
Instructions for installing or reinstalling specific software drivers.
Instructions for upgrading the system's RAM modules.
Guidance on how to flash or update the system's BIOS.
Information on obtaining the latest software drivers for peripherals.
Information on using external drives, like floppy drives, with the controller.
Steps to diagnose and resolve issues where the controller fails to boot.
Solutions for issues where no video is displayed on the monitor.
Troubleshooting boot failures related to installed modules in the chassis.
Resolving problems with the chassis or controller not appearing in Measurement & Automation Explorer (MAX).
Methods to reset the controller's CMOS to default settings.
Information on accessing technical support and other services from National Instruments.
