Page 9For technical questions, please call 1-888-866-5797.Item 56645
Troubleshooting
Problem Possible Causes Likely Solutions
Unit does not spray.
1. Not enough liquid in tank.
2. Sprayer not pressurized.
3. Nuts loose.
4. Spray fluid contains particles or
sand.
5. Nozzle and/or Filter clogged
with mineral buildup.
1. Add liquid to tank.
2. Pump Handle to pressurize Sprayer.
3. Tighten Nuts.
4. Disassemble, clean, then reassemble Nozzle
and/or Handle and Tank Filters. Empty, clean,
then refill Tank with properly strained fluid.
5. Disassemble, clean, then reassemble
Nozzle and/or Handle and Tank Filters.
Spray pattern is
undesirable.
1. Spray fluid contains particles or
sand.
2. Nozzle and/or Filter clogged
with mineral buildup.
1. Disassemble, clean, then reassemble Nozzle
and/or Handle and Tank Filters. Empty, clean,
then refill Tank with properly strained fluid.
2. Disassemble, clean, then reassemble
Nozzle and/or Handle and Tank Filters.
Follow all safety precautions whenever diagnosing or servicing the Sprayer.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify UPC 792363566452 when ordering parts.
To Next Page
Loading...