Nibe BA-SVM 10-200 User Manual

30 NIBE BA-SVM 10-200
Logging
Standard parameters
The following parameters are logged as standard in a
BA-SVM 10-200:
• Date
• Time
• Version
• Current operating mode prioritisation
• BT1 Outdoor temp
• Average value outdoor temp.
• EB15-BT2 Heating medium supply
• EB15-BT3 Heating medium return
• EB15-BT63 Heating medium after immersion
heater
• EB15-BT6 HW charging
• EB15-BT7 HW charging, top
• Calculated supply
• Actual value of Degree minutes
• Status GP12
• Speed GP12
• Status
• Alarm
• Relay status of base card (AA2)
• Power step number
Heat pump:
• EB10X-BT12 Condenser out
• EB10X-BT3 Return
• EB10X-BT14 Hot gas
• EB10X-BT17 Suction gas
• EB10X-BT16 Evaporation
• EB10X-BT15 Fluid pipe
• EB10X-BT28 Outdoor temperature
If AMS 10 is connected:
• EB 10X-BP4 Pressure transmitter
• Low pressure transmitter located in the MHI part
• Current compressor frequency
• Calculated compressor frequency
• Protection mode
• And also the following, if connected:
• EB15-BF1 flow meter
• BT25 external supply temperature sensor
• BT50 Room temperature
• BT51 Pool sensor
NIBE Applications
Nibe Applications software is used to manage set-
tings files and log files.
Updating software
NIBE supplies updated software and instructions for
upgrading at www.nibe.eu/software.
TIP
Selection of comfort mode (economy, normal
and lux) made in menu 2.2.
Section 4 | Description of functions

Nibe BA-SVM 10-200 Specifications

General

Brand	Nibe
Model	BA-SVM 10-200
Category	Air Conditioner
Language	English