Nibe Eminent Series - Specifications and Labelling

Technical specifications
1201005535Model
1201005535lVolume
0,9/9MPa/barMax cut-off pressure
230 VAC + PE / 2 x 400 VAC + PEVoltage
IP24Enclosure class
1/3kWOutput
6/10AFuses required at 1/3 kW
4,9/1,64,1/1,42,3/0,81,4/0,5hHeating time to 45 °C 1/3 kW*
10,1/3,58,1/2,74,5/1,52,9/1,0hHeating time to 80 °C 1/3 kW*
-/-/3436/40/3125/28/2219/21/17kgNet weight E/Cu/R
435280165mmLength sacrificial anode Eminent E
EnamelCorrosion protection Eminent E
CopperCorrosion protection Eminent Cu
StainlessCorrosion protection Eminent R
*For inlet cold water of 10 °C
Energy labelling
NIBE ABSupplier
EVH 16 - 120
E / CU / R
EVH 16 - 100
E / CU / R
EVH 16 - 55
E / CU / R
EVH 16 - 35
E / CU / R
Model
- / - / LLMS
Declared load profile
- / - / CC / C / CC / C / CC / C / B
Water heating energy efficiency class
- / - / 37,837,3 / 37,3 / 38,136,5 / 36,5 / 37,034,2 / 33,7 / 35,6%Water heating energy efficiency, ƞ
wh
- / - / 2 7102 748 / 2 746 / 2 6891 407 / 1 408 / 1389540 / 548 / 519kWhAnnual energy consumption water heating, AEC
- / - / 167140 / 141 / 13578 / 77 / 7147 / 46 / 43lQuantity 40-degree hot water, V40
60606060°CThermostat setting
- / - / 12,5412,77 / 12,76 / 12,546,57 / 6,58 / 6,472,56 / 2,61 / 2,44kWhDaily electrical consumption, Q
elec
15151515dBSound power level L
WA
EN 50440Applied standards
27Eminent
GB