Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page 13.
How to scroll through menus and make different settings is described on
page 18.
INDOOR CLIMATE
HEAT PUMP INFO
HOT WATER
The mode for setting the indoor temperature is accessed by pressing the OK
button twice, when in the start mode in the main menu. Read more about
the settings on page 28.
Increase hot water volume
2X
1X
To temporarily increase the amount of hot water, first turn the control knob
to mark menu 2 (water droplet) and then press the OK button twice. Read
more about the settings on page 45.
In event of disturbances in comfort
If you experience a disturbance in comfort of any kind, there are some
measures you can take yourself before you need to contact your installer.
See page 77 for instructions.
To Next Page
Loading...
