Nibe F1255 Series - Page 32

SCHEDULING COOLING 1.3.2
activated
schedule 2schedule 1
all
mon
tues
wed
thur
fri
sat
sun
21:30 - 06:00
on
Activated
Schedule
Time period AdjustingDay Conflict
Here you can schedule when cooling is
permitted in the accommodation for up
to two different time periods per day.
Adjustment: Here, you schedule when
cooling will not be permitted.
VENTILATION (ACCESSORY REQUIRED)
all
mon
tues
wed
thur
fri
sat
sun
activated
schedule 2schedule 1
SCHEDULING VENTILATION 1.3.3
21:30 - 06:00
speed 3
Activated
Schedule
Time period AdjustingDay Conflict
Increases or decreases in the ventilation
to the accommodation can be scheduled
here for up to two time periods per day.
Adjustment: The desired fan speed is set
here.
Caution
A significant change over a
longer period of time may
cause poor indoor environment
and worse operating economy.
Menu
1.3.3
ADVANCED
advanced 1.9
curve
external adjustment
min. flow line temp.
room sensor settings
cooling settings
fan return time
Menu advanced has orange text and is
intended for the advanced user. This
menu has several sub-menus.
curve Setting the curve slope for heat-
ing and cooling.
external adjustment Setting the heat
curve offset when the external contact
is connected.
min. flow line temp. Setting minimum
Menu
1.9
NIBE F1255Chapter 3 | F1255 – at your service32