Nibe F1255 Series - Page 37

If several climate systems are installed the above settings can be made for the
relevant systems.
COOLING SETTINGS (ACCESSORY REQUIRED)
cooling1.9.5
set pt value cool/heat sensor
heat at room under temp.
cool at room over temp.
cool/heat sensor
°C
°C
°C
cool/heat sensor
Factory setting: no sensor selected
set pt value cool/heat sensor
Setting range: 5 - 40 °C
Default value: 21
Menu
1.9.5
heat at room under temp.
Setting range: 0.5 - 10.0 °C
Default value: 1.0
cool at room over temp.
Setting range: 0.5 - 10.0 °C
Default value: 3.0
larm rumsgivare kyla
Setting range: on/off
Factory setting: off
37Chapter 3 | F1255 – at your serviceNIBE F1255