EasyManuals Logo

Nibe F1255 Series User Manual

Nibe F1255 Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
night cooling1.9.9
min diff. outdoor-exhaust
start temp. exhaust air
°C
°C
night cooling
start temp. exhaust air
Setting range: 20 30 °C
Default value: 25 °C
min diff. outdoor-exhaust
Setting range: 3 10 °C
Default value: 6 °C
Activate night cooling here.
When the temperature in the house is high and the outdoor temperature is lower,
a cooling effect can be obtained by forcing the ventilation.
If the temperature difference between the exhaust air and the outdoor air tem-
perature is greater than the set value ("min diff. outdoor-exhaust") and the exhaust
air temperature is higher than the set value ("start temp. exhaust air") run the
ventilation at speed 4 until one of the conditions is no longer met.
Caution
Night cooling can only be activated when house heating has been de-
activated. This is done in menu 4.2.
+ADJUST
- degree of effect
climate system 1
+adjust 1.9.11
- degree of effect
Setting range: 0.1 1.0
Default value: 0.5
Menu
1.9.11
Using +Adjust, the installation communicates with the underfloor heating’s
control centre* and adjusts the heating curve as well as the calculated supply
temperature according to the underfloor heating system.
NIBE F1255Chapter 3 | F1255 at your service42

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nibe F1255 Series and is the answer not in the manual?

Nibe F1255 Series Specifications

General IconGeneral
BrandNibe
ModelF1255 Series
CategoryHeat Pump
LanguageEnglish

Related product manuals