Page | 4
Mechanical Connection of F2040
➢ Connect to the unit using the supplied flexible hoses with minimum use of elbows.
➢ The Flexible hose incorporating a Manual air vent must be on the flow pipe (top connection).
➢ Flexis/pipework must be insulated and weatherproofed with a UV stable product.
➢ Exposed pipework must be kept to a minimum.
➢ Pipework routed below ground must be low heat loss and kept to the minimum possible length.
➢ Condensation will be produced by and drip from below the unit. This must be safely routed to a drain/soakaway,
avoiding ingress on walkways.
To Next Page
Loading...
