Nibe F2050 - Disturbances in comfort; General troubleshooting; Ice build-up issues; Water accumulation issues

In most cases, the indoor module/control module notes a
malfunction (a malfunction can lead to disturbance in com-
fort) and indicates this with alarms and action instructions
in the display.
NOTE
Work behind covers secured by screws may only
be carried out by, or under the supervision of, a
qualified installation engineer.
Troubleshooting
If the operational interference is not shown in the display
the following tips can be used:
BASIC ACTIONS
• Group and main fuses of the accommodation.
• The property's earth circuit breaker.
• Make sure that the air flow to F2050 is not blocked by
foreign objects.
• Check that F2050 does not have any external damage.
ICE BUILD-UP IN THE FAN, GRILLE AND/OR FAN
CONE
Set the "Fan de-icing" function in the indoor module/control
module. For more information, see the section "Control –
Heat pump EB101" in the Installer Manual.
If problems arise, contact your installer.
WATER BELOW F2050 (LARGER AMOUNT)
• Fit accessory KVR 10 to divert condensation from the
air/water heat pump.
• Check that the water drainage via the condensation pipe
(KVR 10) is working.
9Chapter 5 | Disturbances in comfortNIBE F2050
Disturbances in comfort