Nibe F370 - 3 F370 - at Your Service; Set the Indoor Climate

3 F370 – at your service
Set the indoor climate
Overview
Sub-menus
temperature
INDOOR CLIMATE 1
ventilation
scheduling
advanced
off
normal
For the menu INDOOR CLIMATE
there are several sub-menus. Status
information for the relevant menu can
be found on the display to the right
of the menus.
temperature Setting the temperature
for the climate system. The status in-
formation shows the set values for the
climate system.
ventilation Setting the fan speed. The
status information shows the selected
setting.
scheduling Scheduling heating and ventilation. Status information "set"
is displayed if you set a schedule but it is not active now, "holiday setting"
is displayed if the vacation schedule is active at the same time as the
schedule (the vacation function is prioritised), "active" displays if any part
of the schedule is active, otherwise it displays "off".
advanced Setting of heat curve, adjusting with external contact, minimum
value for supply temperature, room sensor and night cooling.
temperature
temperature heating1.1.1
Set the temperature (with room
sensors installed and activated):
heating
Setting range: 5 – 30 °C
Default value: 20
The value in the display appears as a
temperature in °C if the climate sys-
tem is controlled by a room sensor.
Menu
1.1
27NIBE™ F370Chapter 3 | F370 – at your service