Nibe F370 - Page 39

external adjustment
external adjustment1.9.2
climate system 1
climate system 2
climate system 3
climate system 4
°C
°C
climate system
Setting range: -10 to +10 or desired
room temperature if the room
sensor is installed.
Default value: 0
Menu
1.9.2
Connecting an external contact, for example, a room thermostat or a timer
allows you to temporarily or periodically raise or lower the room temper-
ature while heating. When the contact is on, the heating curve offset is
changed by the number of steps selected in the menu. If a room sensor is
installed and activated the desired room temperature (°C) is set.
If there is more than one climate system the setting can be made separately
for each system.
min. flow line temp.
min. flow line temp.1.9.3
climate system 1
climate system 2
climate system 3
climate system 4
°C
°C
°C
°C
20
20
20
20
heating
Setting range: 20-70 °C
Default value: 20 °C
Menu
1.9.3
Set the minimum temperature on the supply temperature to the climate
system. This means that F370 never calculates a temperature lower than
that set here.
If there is more than one climate system the setting can be made separately
for each system.
37NIBE™ F370Chapter 3 | F370 – at your service