Nibe F370 - Page 60

"addition" is what helps the compressor to heat the accommodation
and/or the hot water when it cannot manage the whole requirement
alone.
"heating" means that you get heat in the accommodation. You can
deselect the function when you do not wish to have heating running.
Caution
If you deselect "addition" it may mean that insufficient hot water and/or
heating in the accommodation is achieved.
my icons
my icons 4.3
outdoor/indoor temperature
hot water temperature
digital clock
analog clock
You can select what icons should be
visible when the door to F370 is
closed. You can select up to 3 icons. If
you select more, the ones you selected
first will disappear. The icons are dis-
played in the order you selected them.
Menu
4.3
time & date
time & date4.4
time
day
year
month
24 h
12 h
date
Set time and date, display mode and
time zone here.
Menu
4.4
TIP
Time and date are set automatically
if the heat pump is connected to
NIBE Uplink™. To obtain the correct
time, the time zone must be set.
NIBE™ F370Chapter 3 | F370 – at your service58