Nibe HBS 05 - Delivery and Handling; Transport; Assembly

Transport
VVM 320 should be transported and stored vertically in
a dry place. However, the VVM 320 may be carefully
laid on its back when being moved into a building.
R
0
R
0
R
0
R
0
Assembly
• Position VVM 320 on a firm base that can take the
weight. Use the product's adjustable feet to obtain a
horizontal and stable set-up.
Position VVM 320 on a fixed foundation that can take
the weight of the heat pump. Use the product's ad-
justable feet to obtain a horizontal and stable set-up.
30 - 50 mm
30 - 50 mm
15 - 40 mm
20-55 mm
• Because water can emerge from the safety valve for
hot water in VVM 320, the area where VVM 320 is
located must be provided with floor drainage.
INSTALLATION AREA
Leave a free space of 800 mm in front of the product.
All service on VVM 320 can be carried out from the front.
800
NOTE
Leave 10 – 25 mm free space between the in-
door module and the wall behind for routing of
cables and pipes.
NIBE VVM 320Chapter 2 | Delivery and handling8
2 Delivery and handling
All manuals and user guides at all-guides.com