To Installers
PELLUX 100/20, PELLUX 100/3014
General Informaon for Installers
Locaon of the Boiler
2
Chimney – Requirements
Specica-
ons
Pellet – Requirements
General Informaon for Installers
Ensure that the chimney cleaning is carried out in ac-
cordance with the procedures in force. If doubt, ple-
ase contact a chimney sweep.
ATTENTION
Before installing, the ue pipe has to be tested and
approved by a chimney sweep.
ATTENTION
It is recommended to use high quality fuel, coming
from reliable sources. Fuel should have adequate
moisture and not contain mechanical impuries (e.g.
sand, stones, metal chips, etc.), which may deteriorate
the combuson process and cause failure of the unit.
ATTENTION
NIBE shall not be liable for any malfuncon and improper
combuson resulng from the use of improper fuel.
ATTENTION