Also new parametrisation of the inverter can be done
here.
NOTE
When resetting, the start guide is displayed
the next time S1255 restarts.
MENU 7.7 - START GUIDE
When S1255 is started for the first time, the start guide
is automatically activated. From this menu, you can start
it manually.
MENU 7.8 - QUICK START
You can quick start the compressor here.
Caution
One of the following demands for the com-
pressor must exist for quick start:
• heating
• hot water
• cooling (accessory is required)
• pool (accessory is required)
Caution
Too many quick starts in a short space of time
may damage the compressor and its auxiliary
equipment.
MENU 7.9 - LOGS
Under this menu, there are logs that collect information
about alarms and changes made. The menu is intended
to be used for troubleshooting.
MENU 7.9.1 - CHANGE LOG
Read off any previous changes to the control system
here.
NOTE
The change log is saved at restart and remains
unchanged after factory setting.
MENU 7.9.2 - EXTENDED ALARM LOG
This log is intended to be used for troubleshooting.
MENU 7.9.3 - BLACK BOX
Via this menu, it is possible to export all logs (Change
log, Extended alarm log) to USB. Connect a USB
memory and select the log(s) you want to export.
57Chapter 9 | Control - MenusNIBE S1255
To Next Page
Loading...
