Nibe S1255-12 User Manual

2.
Hook the other corner in place.
3.
Check the display is straight. Adjust if necessary.
4.
Press the top of the front section against the frame
and screw it into place.
REMOVE SIDE PANEL
The side panels can be removed to facilitate the install-
ation.
1.
Remove the screws from the upper and lower
edges.
U
N
2.
Twist the panel slightly outwards.
UN
3.
Move the panel outwards and backwards.
UN
NIBE S1255Chapter 2 | Delivery and handling8

Nibe S1255-12 Specifications

General

Brand	Nibe
Model	S1255-12
Category	Heat Pump
Language	English