Mounting
Install THS 10 in a suitable location approx. 1,5 m above
the floor. It is important that THS 10 is not prevented
from measuring the correct humidity and room temper-
ature, for example by being placed in a recess, between
shelves, behind a curtain, above or close to a heat
source, in a draught from an external door or in direct
sunlight.
1.
Fit the wall mount to the wall.
2.
Insert the batteries.
3.
Fit THS 10 on the wall mount.
NOTE
THS 10 must not be installed outdoors.
15THS 10 | GB
To Next Page
Loading...
