Nibe THS 10 - Advanced Humidity Control; Limit RH in Heat Function; Prevent Condensation in Cold

Here, you make settings for demand-controlled ventila-
tion.
The speed of the fan can be changed depending on the
humidity in the air.
MENU 7.1.6.4 - LIMIT RH IN HEAT
Here you can activate Humidity control, controlled by
the relative humidity (RH) of the air, during heating oper-
ation. Only shown if a moisture sensor is installed
MENU 7.1.7.2 - HUMIDITY CONTROL
Only shown if a moisture sensor is installed and cooling
is activated.
Prevent condensation in cold
Setting range: on/off
Limit RH in cold
Setting range: on/off
Prevent condensation in cold: With the function activ-
ated, condensation in the pipes is prevented.
Limit RH in cold: With the function activated, the tem-
perature is regulated to achieve the desired relative hu-
midity (RH).
17THS 10 | GB