Nibe VVM 500 - Page 16

SYSTEM DIAGRAM
VVM 500 consists of a hot water coil, immersion heater,
circulation pumps, buffer vessel, control system and is
prepared for use with solar panels. VVM 500 connects
to the climate system.
VVM 500 is directly adapted for connection and commu-
nication with a compatible NIBE air/water heat pump,
see section "Outdoor modules", and together they con-
stitute a complete heating installation.
When it is cold outdoors, the air/water heat pump works
with VVM 500, and if the outdoor air temperature falls
below the heat pump’s stop temperature, all heating is
carried out by VVM 500.
XL 4
39 2
13
14
38 9 30 1 18
19
SYMBOL KEY
MeaningSymbol
Shut-off valve
Non-return valve
Mixing valve
Circulation pump
Immersion heater
Expansion vessel
Filterball
Flow meter/energy meter
Shut off valve
Pressure gauge
P
Control valve
Safety valve
Reversing valve/shunt
Manual reversing valve/shunt
Under floor heating systems
Indoor module
Cooling system
Air/water heat pump
Radiator system
Domestic hot water
Hot water circulation
NIBE VVM 500Chapter 4 | Pipe connections16