Nibe VVM 500 - 2 Delivery and Handling; Transport; Assembly

Transport
VVM 500 should be transported and stored vertically in
a dry place. However, the VVM 500 may be carefully
laid on its back when being moved into a building.
R
0
R
0
Assembly
• Place VVM 500 on a solid foundation indoors that can
take its weight. Use the product's adjustable feet to
obtain a horizontal and stable set-up.
The space where VVM 500 is located must be frost-
free.
30 - 50 mm
30 - 50 mm
15 - 40 mm
20-55 mm
• Because water can exit the safety valve
1
for hot wa-
ter, when connected to VVM 500, the space where
VVM 500 is placed must be provided with a floor drain.
1
Not enclosed.
INSTALLATION AREA
Leave a free space of 800 mm in front of the product.
All service on VVM 500 can be carried out from the front.
800
10-25
50
50
NOTE
Leave 10 – 25 mm free space between
VVM 500 and the wall behind for routing cables
and pipes.
NIBE VVM 500Chapter 2 | Delivery and handling8
2 Delivery and handling