Nibe VVM 500 - Page 67

Miscellaneous
Indoor module
22.8lVolume hot water coil
500lVolume, total indoor module
80lVolume buffer vessel
2lVolume, solar coil
1.0MPaCut-off pressure, hot water coil
(10 bar)
0.3 (3 bar)MPaMax permitted pressure in indoor module
Capacity hot water heating According to EN 16147
390litreAmount of hot water (40 °C)*
Dimensions and weight
760mmWidth
900mmDepth
1,900mmHeight
2,000mmRequired ceiling height
240kgWeight (excl packaging)
Lead in brass componentsSubstances according to Directive (EG) no. 1907/2006, article 33 (Reach)
069 400Part no.
*Applies in the case of normal comfort mode, tap flow 8 litres/minute and incoming cold water 10 °C. Increased hot water comfort can be
obtained at lower tap flow.
67Chapter 12 | Technical dataNIBE VVM 500