Nibe VVM 500 - Page 49

pool (accessory is required)
SRRO 
DFWLYDWHG
VWDUW WHPS
VWRS WHPSHUDWXUH
r&
r&
start temp
Setting range: 5.0 - 80.0 °C
Default value: 22.0 °C
stop temperature
Setting range: 5.0 - 80.0 °C
Default value: 24.0 °C
Menu
4.1.1
Select whether the pool control is to be activated and within what temperat-
ures (start and stop temperature) pool heating must occur.
When the pool temperature drops below the set start temperature and there
is no hot water or heating requirement, VVM 500 starts pool heating.
Untick "activated" to switch off the pool heating.
Caution
The start temperature cannot be set to a value that is higher than the stop
temperature.
47NIBE™ VVM 500Chapter 3 | VVM 500 – at your service