sms (accessory is required)
SKRQH QXPEHU
DODUP UHFHLYHU
VPV
Menu
4.1.4
Make settings for the accessory SMS 40 here.
Add the mobile numbers that are to have access to change and receive status
information from the indoor module. Mobile numbers must include country
code e.g. +46 XXXXXXXX.
If you want to receive an SMS message in the event of the alarm mark the
box to the right of the telephone number.
NOTE
Telephone numbers provided must be able to receive SMS messages.
op. mode
op. mode
Setting range: auto, manual, add. heat only
Default value: auto
functions
Setting range: compressor, addition, heating
Menu
4.2
The indoor module operating mode is usually set to "auto". It is also possible
to set the indoor module to "add. heat only", but only when an addition is
used, or "manual" the select yourself what functions are to be permitted.
Change the operating mode by marking the desired mode and pressing the
OK button. When an operating mode is selected it shows what in the indoor
module is permitted (crossed out = not permitted) and selectable alternatives
NIBE™ VVM 500Chapter 3 | VVM 500 – at your service48
To Next Page
Loading...
