Nibe VVM S320 Installer Manual

4. Press the top of the front section against the frame and
screw it into place.
OPEN VENT COVER
REMOVE SIDE PANEL
The side panels can be removed to facilitate the installation.
1. Remove the screws from the upper and lower edges.
U
N
2. Twist the panel slightly outwards.
UN
3. Move the panel outwards and backwards.
UN
4. Assembly takes place in the reverse order.
9Chapter 2 | Delivery and handlingNIBE VVM S320

Nibe VVM S320 Specifications

General

Brand	Nibe
Model	VVM S320
Category	Heat Pump
Language	English