Nice ALTO

Motorisation pour portail à battants
ALTO
FR - Instructions et avertissements pour l’installation et l’utilisation
EN - Instructions and warnings for installation and use
IT - Istruzioni ed avvertenze per l’installazione e l’uso
PL - Instrukcje i ostrzeenia do instalacji i uytkowania

Nice ALTO Specifications

General

Max. opening speed	0.2 m/s
Power supply	230V AC
Motor Type	DC Motor
Remote Controls	2
Security	Rolling code
Battery Backup	No

Summary

GENERAL SAFETY WARNINGS AND PRECAUTIONS

Important Safety Instructions

Crucial safety guidelines for installation and operation to prevent hazards.

Installation Precautions

Specific safety measures to be followed during the installation process.

PRODUCT KNOWLEDGE AND PREPARATION

GATE SUITABILITY AND APPLICATION LIMITS

GEARMOTOR INSTALLATION

Installation with Standard Length Arms

Step-by-step instructions for installing the gearmotor with standard arms.

Installation with Short Arm

Step-by-step instructions for installing the gearmotor with a short arm.

INSTALLING AND CONNECTING OTHER DEVICES

Connecting Gearmotor ALTO100 M

Procedure for connecting the ALTO100M gearmotor without a control unit.

Installing Flashing Light FL200

Connecting Photocell Pair PH200

Connecting Devices to Control Unit

CONTROL UNIT POWER AND PROGRAMMING

Initial Start-up and Connection Check

Steps for initial power-up and checking electrical connections of the control unit.

Standard Control Unit Programming

Procedures for programming the control unit, including device learning.

AUTOMATION TESTING AND COMMISSIONING

Setting Permanent Power Supply

Procedures for permanently connecting the automation to the mains power supply.

Testing and Commissioning Procedures

Essential steps for testing and commissioning the automation system for safety.

FURTHER INFORMATION: ADDITIONAL TASKS

ADVANCED SETTINGS AND INPUTS

ADDITIONAL PHOTOCELLS AND DEVICE LEARNING

TRANSMITTER MANAGEMENT AND PARAMETER SETTINGS

Transmitter Management Procedures

TROUBLESHOOTING AND SYSTEM SIGNALS

Troubleshooting Malfunctions

Guidance on identifying and resolving malfunctions using signals and tables.

System Signal Lights