Need help?Do you have a question about the Nice ALTO100C and is the answer not in the manual?
General| Operating Temperature | -20°C to +50°C |
|---|---|
| Horsepower | 1/2 HP |
| Drive Type | Chain drive |
| Remote Controls Included | 2 |
| Security | Rolling code |
| Battery Backup | Not included |
| Safety Features | Auto-reverse mechanism, photoelectric sensors |
Essential safety guidelines for installing the gate automation system.
Details the ALTO system's components and intended applications.
Lists all necessary devices and optional accessories for system setup.
Verifies gate mechanics and installation environment meet requirements.
Checks if the gate dimensions and weight are within system specifications.
Ensures all necessary tools and materials are ready before starting.
Establishes optimal placement for all system devices.
Plans the path for all connection cables and ducting.
Guides in choosing appropriate cables and their lengths for connections.
Step-by-step guide for installing gearmotors with standard arms.
Step-by-step guide for installing gearmotors with short arms.
Instructions for connecting the ALTO100M gearmotor without a control unit.
Guide for installing and wiring the FL200 flashing light.
Instructions for installing and wiring the PH200 photocell pair.
Details how to connect various devices to the control unit's terminals.
Guide for connecting the control unit to the main power supply.
Explains the functions of keys and LEDs on the control unit.
Verifies all electrical connections after initial power-up.
Procedure for the control unit to recognize connected devices.
Sets the maximum opening angle for the gate leaves.
Configuration of movement speed and work cycle modes.
Verifies that radio transmitters are communicating correctly.
Essential steps to test system functionality and safety.
Final steps to put the automation into operational service.
Guidelines for regular checks to ensure system efficiency and safety.
Instructions for environmentally responsible disposal of the product.
Covers tasks like removing units, replacing fuses, and installing backup batteries.
Details how to connect the SOLEKIT photovoltaic system.
Explains the functionality and usage of BUS and STOP inputs.
Guide for adding more photocell pairs to the system.
Procedure to make the control unit recognize newly connected or removed devices.
How to adjust system parameters for specific needs.
A reference list of modifiable parameters and their settings.
How to verify the current settings of various parameters.
Initial setup for registering transmitters with the control unit.
Method for associating transmitter keys with default commands.
Method for manually assigning specific commands to transmitter keys.
Copying settings from an existing transmitter to a new one.
Procedure to remove all programmed radio transmitters.
How to control multiple automations with Mode II transmitters.
Explains the meaning of LED indicators on the photocells.
Interprets LED status lights on the control unit for diagnostics.
Describes the signals provided by the flashing light indicator.
Detailed technical data for the ALTO100C gearmotor model.
Detailed technical data for the ALTO100M gearmotor model.
Crucial safety advice for users operating the automated gate.
How to manually operate the gate in case of power failure or malfunction.
Explains how to control the gate using the radio transmitter.
Basic maintenance tasks that users can perform.
Guide on how to replace the battery in the radio transmitter.
To Next Page
