CBOX1050
Installation and Programming Manual
6060
support.hysecurity.com
OVIEW
CONTROLLER
9.4 COMMUNICATIONS BUS
The 1050 control board communication bus is described in this section.
OVIEW CONTROLLER:
• The Oview controller is an optional programming and diagnostic tool, which plugs directly into the 1050
control board using an RJ45 network cable and is part of the Nice “Opera” control system.
• The Oview controller can be used in “stand-alone” mode via its front-panel keypad, or it may be accessed via
a Bluetooth-enabled PC when used with the optional OVBT module and Oview Software Suite.
• This unit, when matched with the optional Oview Bluetooth module (OVBT; see below) enables remote
control and management of the gate controller.
• Remote control functions include most of the programming functions that are available at the front panel LCD
on the control board as well as software updates.
OVBT MODULE:
The optional OVBT Bluetooth module is used with the Oview controller and the “Oview Software Suite” application
for PC for localized wireless control of the gate controller.
OPTIONAL
OVBT
MODULE
To Next Page
Loading...
General