To Next PageTo Next Page
Need help?Do you have a question about the Nice D-Pro Automatic R01 Series and is the answer not in the manual?
General| Brand | Nice |
|---|---|
| Model | D-Pro Automatic R01 Series |
| Category | Control Unit |
| Language | English |
Crucial safety instructions for operation, installation, and environmental hazards.
Guidance on outdoor cable protection, system modifications, and explosive environments.
Details the D-PRO Automatic control unit's purpose and capabilities.
Key checks and considerations before starting the installation process.
Instructions for installing the control unit housing in various configurations.
Guidance on routing cables and performing initial electrical hookups.
Specific wiring instructions for connecting a three-phase power supply.
Specific wiring instructions for connecting a single-phase power supply.
Procedure for correctly configuring the motor's rotation direction.
Connecting external key switches, keypads, and pull-cord controls.
How to connect 8.2kOhm and optoelectronic safety edges.
Principles and procedures for adjusting mechanical limit switches.
Connecting emergency stop, stop controls, and pedestrian door safety switches.
Wiring for indicator lamps and installing radio receivers.
Specific steps for adjusting mechanical limit switches on large drives.
Specific steps for adjusting mechanical limit switches on small drives.
Configuring the top, bottom, and partial open door positions digitally.
Using parameters for precise adjustments of limit switch functions.
How to set or modify the direction of rotation for the encoder.
Viewing door status, parameters, and managing the automatic closing function.
Procedures for modifying, deleting parameters, and selecting display modes.
Identification of terminals for limit switches and safety edges on the motherboard.
Location of terminals for key switches, photocells, and other control inputs.
Identification of terminals for mains power, motor, and brake connections.
Overview of the front board's display, control buttons, and dipswitch settings.
Detailed technical specifications for the 2.2kW model.
Detailed technical specifications for the 5.5kW model.
