To Next PageTo Next Page
Need help?Do you have a question about the Nice RO1000 and is the answer not in the manual?
General| Brand | Nice |
|---|---|
| Model | RO1000 |
| Category | Control Unit |
| Language | English |
Instructions for operating the gearmotor manually using the key and handle.
Adjusting torque for RO1000/RO1024 via electronic control unit.
Section for recording customer and installation details.
List of control box, radio, and safety devices installed.
Log for scheduled maintenance checks and dates.
Instructions for filling out defect information for repair.
Space for NICE spa to communicate with the client regarding repairs or parts.
Guidance and precautions for qualified installers on control unit usage.
Illustrates a typical setup for automatic door or gate systems.
Guidance on wiring and connecting components safely.
Details the functions and descriptions for each control unit terminal.
Explains the Phototest for safety devices and its setup.
Adjusts the maximum duration for opening or closing manoeuvres.
Sets the delay between opening and closing manoeuvres in automatic mode.
Adjusts the maximum force applied by the system, affecting safety.
Details the effects of various programmable functions activated by Dip-Switches.
Instructions for setting up automation with two opposing gate leaves.
Optional card adding traffic light, courtesy light, electric locking, and Phototest.
Connector for radio receiver card to enable remote control.
Steps to take when no LEDs are lit on the control unit.
Troubleshooting input LED issues when the OK LED is flashing.
Checks for starting issues, including safety device status.
Diagnosing causes for unexpected gate direction reversal.
