To Next PageTo Next Page
Need help?Do you have a question about the Nice MC424 and is the answer not in the manual?
General| Model | MC424 |
|---|---|
| Category | Control Unit |
| Frequency | 50/60 Hz |
| Operating Temperature | -20°C to +50°C |
| Temperature Range | -20°C to +50°C |
| Power Supply | 230 Vac ± 10% 50/60 Hz |
Important instructions and warnings for personal safety during installation and use.
Crucial guidelines for safe installation, handling, and environmental considerations.
Overview of the MC424 control unit and its primary functions.
Covers preliminary checks, application limits, and electrical connection basics.
Verifies product suitability, installation environment, and operational limitations.
Detailed guidance on wiring power supply, motors, and accessory devices.
Steps for powering up, initial checks, and automatic limit switch calibration.
Verifies functionality of inputs, outputs, safety devices, and obstacle detection.
Final checks, documentation, and owner information before operational use.
Interprets LED flash codes to identify operational problems or malfunctions.
Lists the default configurations and settings of the control unit.
Details functions and parameters that can be customized for specific needs.
Guides on entering programming levels, deleting memory, and applying settings.
Demonstrates programming steps and provides a visual guide to functions.
Instructions for connecting SMXI and SMXIS radio receivers.
Guide for installing and connecting the PS124 buffer battery for power backup.
Instructions for powering the control unit with the Solemyo photovoltaic system.
Diagnoses common issues like no LEDs, input signal problems, or search procedure failures.
Recommends periodic checks of the system's efficiency.
Guidelines for environmentally responsible disposal of the product.
Lists electrical specifications, operating conditions, and dimensions of the control unit.
States compliance with EMC and Machinery Directives and relevant harmonised standards.
Overview of SMXI and SMXIS 4-channel radio receivers.
Guidance on properly installing the aerial for optimal receiver range.
Procedures for memorizing new transmitters onto the receiver.
Procedure to erase all memorized transmitter codes from the receiver.
Specifications for SMXI and SMXIS receivers including decoding and sensitivity.
Specifications for FLO2R and SMILO transmitters including buttons and power input.
