EasyManua.ls Logo

Nice MINDY A60A

Nice MINDY A60A
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Control unit
MINDY
A60
EN - Instructions and warnings for installation and use
IT - Istruzioni ed avvertenze per l’installazione e l’uso
FR - Instructions et avertissements pour l’installation et l’utilisation
ES - Instrucciones y advertencias para la instalación y el uso
DE - Installierungs-und Gebrauchsanleitungen und Hinweise
PL -Instrukcjeiostrzeżeniadoinstalacjiiużytkowania
NL - Aanwijzingen en aanbevelingen voor installatie en gebruik
RU - Инструкции и важная информация для технических специалистов
www.metalines.com
sales@metalines.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nice MINDY A60A and is the answer not in the manual?

Nice MINDY A60A Specifications

General IconGeneral
BrandNice
ModelMINDY A60A
CategoryControl Unit
LanguageEnglish

Summary

General Safety Warnings and Directives

Safety Guidelines and Legal Compliance

General safety advice and legal compliance for installation and use.

Product Compliance with European Directives

Warnings related to Machine, Low Voltage, and EMC Directives.

Product Description and Component Overview

Component Identification Diagram

Identification of key components via diagram and list.

Control Unit Component List

Detailed list of numbered components on the control unit.

Operating Limits and System Setup

System Components

Lists components in a typical gate automation system.

Cable Specifications for Installation

Details cable types and maximum admissible lengths for connections.

Installation Procedures and Mounting

Pre-Installation Safety and Suitability Checks

Pre-installation checks for safety, suitability, and compliance.

Control Unit Mounting and Fixing Instructions

Instructions and diagrams for physically mounting the control unit.

Electrical Connections and Functions

Terminal Functionality Guide

Detailed explanation of terminal functions and their connections.

Motor Capacitor Connection

Explains how to connect capacitors for asynchronous motors.

Phototest Function Explained

Details the Phototest function, its benefits, and setup.

Connection Verification and System Checks

LED Status Indicators

Explains the meaning of the 'OK' LED status for logic and faults.

Motor Direction Check

How to check and correct motor rotation direction.

Parameter Adjustments and Trimmer Settings

Adjusting Motor Working Times

Adjusting maximum opening/closing times for motors.

Setting Opening and Closing Delays

Setting delays to prevent leaf jamming or overlap.

Configuring Pause Time

Setting the pause duration between opening and closing.

Adjusting Safety Force Levels

Adjusting safety force levels, requires careful trial.

Balancing Opening and Closing Times

Balancing opening/closing times for offset or different speed motors.

System Operating Modes

System Programming and Dip-Switch Functions

Dip-Switch Functionality Guide

Table detailing functions controlled by Dip-Switches 1-12.

Detailed Function Descriptions

Manual, Semiautomatic, Automatic Modes

Explains basic operating modes (Manual, Semiautomatic, Automatic).

Condominium Operation

Describes the Condominium operating mode and its behaviour.

Pre-flashing Function

Function to activate flashing light before movement.

Delayed Closing (Photo)

Function for delayed closing after safety device activation.

Safety (Photo1) during Opening

Extends safety device function to opening manoeuvres.

Ramming Function

Function for electric locks to ensure proper closing.

Deceleration Function

Reduces speed for smoother stops and impact reduction.

Maintain Pressure

Restores hydraulic pressure periodically for hydraulic actuators.

Phototest Function

Checks photocell efficiency before each manoeuvre.

Courtesy Light (Impulse)

Controls courtesy light output for timed activation.

Pedestrian Access (Close becomes Open)

Allows one leaf to open for pedestrian access.

System Testing and Commissioning Procedures

Control Unit Testing Steps

Steps to test the control unit's functions and connections.

Final System Commissioning

Steps for final system commissioning and documentation.

Maintenance, Disposal, and Technical Specs

Regular Maintenance Schedule

Guidelines for regular maintenance and safety checks.

Product Disposal Instructions

Instructions for environmentally sound disposal of the product.

Optional Accessories

Information on available accessories like the radio card.

Technical Specifications Summary

Key technical data and specifications of the A60 model.

User Instructions and Warnings

Initial Setup and System Operation

First-time use, manual reading, and safe operation practices.

Safety Precautions for Children and Misuse

Protecting children and avoiding improper system use.

Photocell Functionality and Malfunctions

Understanding photocells and troubleshooting malfunctions.

Maintenance, Modifications, and Documentation

Scheduled maintenance, modification warnings, and record-keeping.

Power Failure and Battery Replacement

Procedures for power failures and remote control battery replacement.

CE Declaration of Conformity

Related product manuals