Nice Moon MC824H User Manual

EN - Instructions and warnings for installation and use
IT - Istruzioni ed avvertenze per l’installazione e l’uso
FR - Instructions et avertissements pour l’installation et l’utilisation
ES - Instrucciones y advertencias para la instalación y el uso
DE - Installierungs-und Gebrauchsanleitungen und Hinweise
PL - Instrukcje i ostrzeżenia do instalacji i użytkowania
NL - Aanwijzingen en aanbevelingen voor installatie en gebruik
Moon
Control unit
MC824H

Nice Moon MC824H Specifications

General

Brand	Nice
Model	Moon MC824H
Category	Control Unit
Language	English

Summary

1 - PRODUCT DESCRIPTION AND INTENDED USE

2 - INSTALLATION

2.1 - Preliminary checks for installation

Checks required before starting the installation of the product to ensure suitability and correct conditions.

2.2 - Product application limits

Defines the specific gearmotors and usage limitations for the MC824H control unit.

2.3 - Typical system

Illustrates a typical automation system setup with Nice components and their layout.

2.4 Installation of control unit

Procedure for mounting the control unit box and preparing cable routing holes.

3 - ELECTRICAL CONNECTIONS

3.1 Description of electrical connections

Details the purpose of each terminal and connection point on the control unit.

3.2 - Connection of other devices to MC824H

Connects additional devices to the control unit using specific terminals.

3.3 - Connected device address assignment to MC824

Assigns unique addresses to Bluebus system devices for recognition.

3.4 - Initial start-up and electrical connections

Steps for initial power-up and verification of control unit status and LEDs.

3.5 - Learning of the devices connected to MC824H

Procedure for the control unit to recognize connected Bluebus and Stop input devices.

3.6 - Selection of type of gearmotor connected to MC824H and learning of the positions of the mechanical stops

Selects gearmotor type and learns mechanical stop positions for automation.

3.6.1 - Selecting the motor type and learning procedure in automatic mode

Automatic process to select motor type and learn mechanical stop positions.

3.6.2 - Selecting the motor type and learning procedure in manual mode

Manual process to program automation with specific positions and sequences.

3.7 - Checking movement of gate leafs

Verifies correct gate leaf movement and checks for installation defects after learning.

4 - TESTING AND COMMISSIONING

4.1 - Testing

Procedures and checks to ensure system safety and functionality after installation.

4.2 - Commissioning

Final steps to certify the automation system and provide documentation to the owner.

5 - PROGRAMMING

5.1 - Level one programming (ON-OFF functions)

Setting of basic ON-OFF functions for the automation system.

5.2 - Level two programming (adjustable parameters)

Adjusting system parameters on a scale from 1 to 8.

5.3 - Special functions

Accessing and configuring advanced operational modes.

5.3.1 - Function: "Move anyway"

Allows operation even if safety devices are not working correctly.

5.3.2 - Function: "Maintenance warning"

Indicates when the automation requires maintenance based on manoeuvre count.

5.4 - Deleting the memory

Restores factory settings by deleting the control unit memory.

6 - WHAT TO DO IF... (troubleshooting guide)

7 - FURTHER DETAILS

7.1 - Connecting a radio receiver

Connects SMXI, OXI family receivers to the control unit for radio control.

7.2 - Connecting Oview programming unit

Connects the Oview programming unit for installation, maintenance, and troubleshooting.

7.3 - Connecting the Solemyo solar energy system

Connects the Solemyo solar energy system for power supply.

7.4 - Connecting model PS324 buffer battery

Connects the PS324 buffer battery for power backup.

8 - PRODUCT MAINTENANCE

PRODUCT DISPOSAL

Disposal of buffer battery (if present)

Guidelines for the proper disposal of buffer batteries.

TECHNICAL CHARACTERISTICS OF THE PRODUCT

CE DECLARATION OF CONFORMITY

Instructions and warnings for the user