Special functions
As described above, relay modules can be mounted with special functions in addition to the standard
ones. The receiver is able to manage these special functions completely without using special relay
modules. By plugging in normal MXD type modules and activating the receiver’s special functions
you will be able to have:
1) Step-by-step function
The relay is activated when the transmitter key is pressed and remains energised after it has been
released; the relay will be deactivated when the key is pressed again.
2) Timer function:
The relay is activated when the transmitter key is pressed and remains energised until the
programmed time has elapsed. Time counting starts again each time the transmitter key is pressed
and can be terminated early by keeping the key pressed for at least 3 seconds.
3) Anti-theft function:
This is a combined function of outputs 1 and 2; by pressing transmitter key 1 you will have the step-
by-step function on channel 1 (suitable for connecting/disconnecting an anti-theft device). On
channel 2, besides normal functioning associated with transmitter key 2, there will be a brief
activation when channel 1 goes from OFF to ON and two short activations when channel 1 goes from
- 39 -
GB
To Next Page
Loading...
