Memory card
Each transmitter has its own code number (selected from more than 250 million) that distinguishes it
from all other remote controls. The receiver can receive all the codes but is activated only if that
particular code is on the list of “authorised” code numbers on the memory card.
The receivers are supplied with a BM1000 memory card that can contain a maximum of 255 code
numbers (255 remote controls are the maximum quantity). A BM60 memory card can also be used
with a maximum of 16 code numbers or a
BM250 with a maximum of 63 code
numbers.
Other memory cards can be plugged in if
required up to a maximum of 4 and,
hence, a total of 1020 code numbers. The
cards must be plugged-in in order, from
the 1st to the 4th. The receiver does, in
fact, enter and search codes starting from
the first memory card and then goes on to
the second if necessary, and so on. If a
memory card is not completely full or is
completely missing, the subsequent
memory cards are disregarded.
- 35 -
GB
1°
2°
3°
4°
Fig. 3
To Next Page
Loading...
