Nice LBar - Page 45

To Previous Page

ISTML-BARR02.4865_15-11-2013

www.niceforyou.com

Nice SpA

Oderzo TV Italia

info@niceforyou.com

Main Page

Table of Contents3
Warnings and General Precautions3
Safety Instructions3
Installation Warnings3
Special Warnings Related to European Directives Applicable to the Product3
Installation Criteria and Special Warnings Related to Essential Requirements4
Product Description and Intended Use5
Installation5
Preliminary Checks for Installation5
Product Application Limit5
Product Durability5
Preliminary Work Prior to Installation6
Identify the Scheme on the Basis of Which to Position each Plant Component6
Determine the Path of the Connecting Cables6
A) - Position the Balancing Spring in Relation to Pole Weight, Complete with the Re6
The Motor6
Barrier Lift Fixture6
If the Support Surface Already Exists6
If the Support Surface Does Not Exist6
Installing the Rod and the Accessories Provided7
Pole Support Assembly7
Assembling a Pole Formed of a Single Piece, Whole or Cut7
Assembling a Pole Formed of Two Pieces, Either Whole or Cut8
Installation of Required Pole Accessories8
Manually Releasing and Locking the Barrier8
How to Move the Locking Cylinder for Manual Release and Lock8
Limit Switch Mechanical Stop Adjustment8
Pole Balancing8
M3BAR / M5BAR / M7BAR Pole Balancing8
LBAR Pole Balancing8
Electrical Connections8
Description of the Electrical Connections8
Initial Start-Up and Electrical Connections9
Pre-Set Functions9
Recognition of the Connected Devices9
Recognition of Limit Positions on Opening and Closing9
Pole Movement Check9
Connecting a Radio Receiver10
Connecting the Pole Lights (Optional Accessory)10
Connecting the LED Flashing Light Mod. XBA7 or Traffic Light to LED Mod. XBA8 (Optional Accessories)10
Connection of Other Devices10
Programming Unit Oview10
Buffer Battery Mod. PS224 (Accessory)10
Solemyo System (Photovoltaic Supply)10
Testing and Commissioning11
Testing11
Commissioning11
Control Unit Programming12
Level One Programming (ON-OFF Functions)12
Level Two Programming (Adjustable Parameters)12
Further Information14
Total Deletion of Control Unit Memory14
Other Functions14
Adding or Removing Devices15
Bluebus Inlet15
Photocells15
MOTB Digital Selector and Proximity Reader for MOMB Transponder Cards15
STOP Input15
Diagnostics16
Signals of Control Unit16
Flashing Light Signals18
Loop Detector18
Operation18
Installation18
Master - Slave Mode20
Installation and Electrical Connections20
What to Do if21
Declaration of Conformity: Appendix I (Removable23
Declaration of Conformity: Appendix II (Removable24
Operation Manual (Removable25
(Removable27

Nice LBar - Page 45

Table of Contents

Other manuals for Nice LBar

Related product manuals