Nice Maestro300

Maestro300
FR - Instructions et avertissements pour l’installation et l’utilisation
EN - Instructions and warnings for installation and use
IT - Istruzioni ed avvertenze per l’installazione e l’uso
PL -Instrukcjeiostrzeżeniadoinstalacjiiużytkowania
Pour portail battant

Nice Maestro300 Specifications

General

Brand	Nice
Model	Maestro300
Category	Other
Language	English

Summary

GENERAL SAFETY WARNINGS AND PRECAUTIONS

STEP 1

Important safety instructions for installation and use.

KNOWLEDGE OF THE PRODUCT AND PREPARATION FOR INSTALLATION

2.1 - PRODUCT DESCRIPTION AND INTENDED USE

Description and intended use of the MAESTRO300 automation system.

STEP 3

3.1 CHECK SUITABILITY OF GATE TO BE AUTOMATED AND OF THE ENVIRONMENT

Verifying gate suitability and environmental conditions for automation.

3.2 - PRODUCT APPLICATION LIMITS

Limits for product application regarding gate dimensions and weight.

STEP 4

4.1 - WORKS PRIOR TO INSTALLATION

Preparatory works before starting the installation.

4.2 - ELECTRICAL CABLES PREPARATION

INSTALLATION: COMPONENT ASSEMBLY AND CONNECTION

STEP 5

5.1 - MAESTRO300 C and MAESTRO300 M GEARMOTOR INSTALLATION

Installing the MAESTRO300C/MAESTRO300M gearmotor.

5.2 ADJUSTING THE OPENING MECHANICAL LIMIT SWITCH

5.3 - MAESTRO300 C and MAESTRO300 M GEARMOTOR CONNECTION

Connecting the MAESTRO300C/MAESTRO300M gearmotor.

STEP 6

6.1 - INSTALL AND CONNECT PHOTOCELLS

6.2 - INSTALL AND CONNECT FLASHING INDICATOR

PROGRAMMING

STEP 7

7.1 - POWER SUPPLY CONNECTION

7.3- CONNECTED DEVICES RECOGNITION

7.4 - GATE LEAF OPEN AND CLOSURE ANGLES RECOGNITION

Recognizing gate leaf opening and closing angles.

7.6 - ADJUSTMENTS

TESTING AND COMMISSIONING

STEP 8

Testing and commissioning the automation system.

8.1 - TESTING

Performing tests on the automation system.

8.2 - COMMISSIONING

Commissioning the automation system after successful testing.

MAINTENANCE

STEP 9

Maintenance operations for the automation system.

FURTHER DETAILS

10.1 - ADVANCED ADJUSTMENTS

10.1.1 - Parameter adjustment using radio transmitter

10.3 - DEVICES ADDITION OR REMOVAL

10.3.3 - Recognition of Other Devices

10.4 - RADIO TRANSMITTERS MEMORISATION

Memorizing radio transmitters for system control.

10.4.1 - Mode 1 memorisation

10.4.2 - Mode 2 memorisation

10.4.6 - Digital selector switch DS100 programming and deletion

10.5 - TROUBLESHOOTING

Troubleshooting common malfunctions and errors.

10.6 - DIAGNOSTICS AND SIGNALS

Recognizing operating status and possible malfunctions via signals.

10.6.1 - Photocells

10.6.2 - Flashing indicator

10.6.3 - Control unit

USER MANUAL (to be delivered to the end user)

11.1 - WARNINGS

Recommendations for safe use of the automation system.

11.2 - Manually releasing and locking the gearmotor