TECHNICAL SPECIFICATIONS OF PRODUCT
I Mains power supply 230 Vac 50 Hz
I Motor Asynchronous-single phase
I Limit switch type Electromechanical
I Max. power absorption 400 W
I Line Absorption 1.7 A
I Built-in capacitor 12 nF
I Protection rating IP 44
I Maximum torque 15 Nm (500 N)
(corresponding to force)
I Nominal torque 8 Nm (270 N)
(corresponding to force)
I Nominal speed 0.18 m/s
I Thermal protection 140 °C
I Maximum leaf weight 500 Kg
I Maximum leaf length 7 m
I Max. No. Cycles per hour 9 (leaf 7 metres)
I Max. No. consecutive Cycles 5
I Dimensions 290 x 195 x h 250 mm
I Weight 8 Kg
I Max. Service current 24 V 150 mA
(voltage can vary by ± 25%)
I Flashing light output For connection of flashing light
to power mains
(Max. power 40 W)
I Operating temperature From -20 °C to +50 °C
I Work time Adjustable from 2.5 to > 40 s.,
or from < 40 to > 80 s. with TLM
I Pause time Adjustable from 5 to > 80 s.
I Decoding “O-Code” / “FloR” / “TTS”;
or Flo”; or “Smilo”
I Reception frequency 433.92 MHz
I Sensitivity Better than 0.5 V
I Operating temperature from -20 to +55° C
I Input impedance 52 ohm
English – 7
EN