Nice UST1K

18–English
EN
Our gearmotors and control units are
tested at TÜV-NORD
EC DECLARATION OF CONFORMITY
and declaration of incorporation of “quasi-machine”
DeclarationinaccordancewithDirectives:2004/108/EC(EMC);2006/42/EC(MD)annexII,partB
Note - The content of this declaration corresponds to the declaration at the last available version of the document led in the ofces
of Nice S.p.A. prior to the printing of this manual. This text has been adapted to meet editorial requirements. A copy of the original
declaration may be requested from Nice S.p.a. (TV) I.
Declaration number: 441/UST1K Rev.: 0 Language: EN
Name of manufacturer: NICE S.p.A.
Address: ViaPezzaAltaN°13,31046RustignèdiOderzo(TV)Italy
Person authorized
to provide technical
documentation:
Sig.OscarMarchetto.
Product type: Control unit for electromechanical gear-motors
Model / Type : UST1K
Accessories: ModulesK3,K3A,K5,K7
TheundersignedLuigiParo,asManagingDirector,herebydeclaresunderhisownresponsibilitythattheproductidentiedabove
complies with the provisions of the following directives:
· DIRECTIVE2004/108/ECOFTHEEUROPEANPARLIAMENT AND COUNCIL ofDecember 152004 concerningalignment
ofMemberStates’legislationregardingelectromagneticcompatibilityandabrogatingdirective89/336/EEC,accordingtothe
following harmonized standards:
EN6100062:2005,EN6100064:2007
Theproductalsocomplieswiththefollowingdirectiveinaccordancewiththerequirementsfor“quasimachines”:
· Directive2006/42/ECOFTHEEUROPEANPARLIAMENTANDCOUNCILofMay172006regardingmachinesandamending
directive95/16/EC(consolidatedtext),accordingtothefollowingharmonizedstandards:
EN138491:2008
•IdeclarethatthepertinenttechnicaldocumentationhasbeenpreparedinaccordancewithAnnexVIIBtoDirective2006/42/ECandthat
thefollowingessentialrequirementshavebeenmet:1.1.11.1.21.1.31.2.11.2.61.5.11.5.21.5.51.5.61.5.71.5.81.5.101.5.11
•Themanufactureragreestosendthenationalauthoritiespertinentinformationonthe“quasimachine”inresponsetoamotivatedrequest
without aff ecting its intellectual property rights.
•Ifthe“quasimachine”isoperatedinaEuropeancountrywithanofciallanguageotherthanthelanguageusedinthisdeclaration,the
importer must associate a translation with this declaration.
•The“quasimachine”mustnotbeoperateduntilthenalmachineinwhichitistobeincorporatedisdeclaredtoconformtotheprovisions
ofDirective2006/42/EC,ifapplicabletoit.
The product also complies with the following standards:
EN603351:2002+A1:2004+A11:2004+A12:2006+A2:2006+A13:2008
EN603352103:2003
Thepartsoftheproductwhicharesubjecttothefollowingstandardscomplywiththem:
EN132411:2003,EN12445:2002,EN12453:2002,EN12978:2003
Oderzo,November42011 Ing. Luigi Paro
(Managing Director)