Nice UST1K

UST1K
Automatic industrial door control unit
UST1K-1,1kW
UST1K-2,2kW
UST1K-5,5kW
Nice
IT - Istruzioni e indicazioni d’installazione e uso
L‘intero manuale d‘istruzioni è composto delle istruzioni per l‘uso del motore e della relativa centrale di comando.
EN - Instructions and information for installation and use
The entire instruction manual is made up of instructions for using the motor and its control unit.
FR - Instructions et indications d’installation et d’utilisation
L’ensemble du manuel d’instructions comprend les instructions pour utiliser respectivement le moteur et sa centrale de commande.
ES - Instrucciones e indicaciones para la instalación y el uso
El manual de instrucciones está compuesto por las instrucciones de uso del motor y de la central de mando relativa.
DE - Anweisungen und Hinweise für Installation und Bedienung
Die Gesamt-Bedienungsanleitung besteht aus der BA des Antriebes und der dazugehörigen BA der Steuerung.
PL - Instrukcja i wskazówki na temat instalacji i eksploatacji
Cała instrukcja obsługi zawiera instrukcje dotyczące obsługi odpowiednio silnika oraz właściwej centrali sterowniczej.
NL - Instructies en aanwzingen voor de installatie en het gebruik
Deze instructiehandleiding bestaat uit de gebruiksaanwijzingen voor het gebruik van de reductiemotor en
van de bijbehorende bedieningscentrale.

Nice UST1K Specifications

General

Model	UST1K
Type	Control Unit
Frequency	433.92 MHz
Max Load / Motor Power	500 W
Operating Temperature	-20°C to +55°C
Output Voltage	24 Vdc
Maximum Current	2 A
Power Supply	230 Vac
Protection	Overload

Summary

General Safety Rules

Work in Safe Conditions

Emphasizes following instructions for safety reasons.

Strict Installation Guidelines

Highlights crucial installation guidelines and electrical connection rules.

Risk Management and Compliance

Covers installation risks, packaging, regulations, and power disconnection.

System Knowledge and Preparation

Product Description and Usage

Defines UST1K as a control unit for rolling shutters and sectional doors.

Installation and Compliance Requirements

Covers plant manufacturer responsibility, regulations, and power disconnection.

Pre-Installation Checks and Warnings

Details checks, explosion risk, and power supply connection procedures.

Control and Connection Elements

Control Inputs and Operation

Explains control options like buttons, deadman mode, and external controls.

Power Supply Connections

Details three-phase and single-phase power supply cable connections.

Motor Rotation Control

Explains how to check and correct the motor's rotation direction.

Limit Switch Connections

Describes connecting limit switches to the control unit.

External Device Connections

External Control Devices

Describes connecting triple switches, key switches, and STOP buttons.

Sensitive Edge Connections

Details connecting optical and resistive sensitive edges.

Additional Safety and Control Connections

Photoelectric Barrier and Traction Switch

Describes connecting photoelectric barriers and traction switches.

Wicket Door Safety and Remote Control

Covers safety switches for wicket doors and remote control integration.

Mechanical Limit Switch Setting

Setting Procedure Overview

Explains the procedure for setting limit switches for stop positions.

Door Position Adjustment

Details setting limit switches for lower and upper door positions.

Additional Limit Switches

Explains the function and setting of additional limit switches (P1, P2).

Single-Phase Motor Connection

UST1 K Board Wiring Diagrams

Illustrates wiring for single-phase motor connections on UST1K boards.

Assembly and Final Position Setting

Setting Final Positions

Guides setting upper and lower final positions using DIP switches and T2 button.

Precision Adjustment and Partial Opening

Details fine-tuning positions and setting partial opening.

Connection Diagrams and Wiring

Electronic Limit Switch Types

Illustrates connection diagrams for electronic limit switches (A and B types).

Control Station Wiring

Details wire assignments for control stations and motor connections.

Connector Details

Shows diagrams for AMP plugs, Wago terminals, and other connection points.

Settings of Automatic Functions

Operation Modes and Display Messages

Explains normal operation, display messages, and error codes.

Automatic Closing and Reversed Movement

Details setting and timing for automatic closing and reverse movement logic.

DIP Switch Configuration

Explains DIP switch settings for final positions, precision, and traffic lights.

Connection Cables

Electronic Limit Switch Cable (Screened)

Diagram showing the connection cable for gearmotors with electronic limit switches (screened).

More Connection Cables

Electronic Limit Switch Cable (Unscreened)

Diagram showing the connection cable for gearmotors with electronic limit switches (unscreened).

Mechanical Limit Switch Cables

Cable with Screening

Diagram showing the connection cable for gearmotors with mechanical limit switches (screened).

Wiring Diagrams

UST1 K-1.1 kW Main Board Wiring

Detailed wiring diagram of the UST1K-1.1kW control unit main board.

More Wiring Diagrams

UST1 K 2.2 kW5.5 kW Main Board Wiring

Detailed wiring diagram of the UST1K 2.2kW/5.5kW control unit main board.

Electronic Board Details

UST1 K-1.1 kW Board Components

Identifies key components and connection points on the UST1K-1.1kW electronic board.

More Electronic Board Details

UST1 K 2.2 kW5.5 kW Board Components

Identifies key components and connection points on the UST1K 2.2kW/5.5kW electronic board.

Technical Data and Features

Product Specifications

Provides technical specifications for UST1K models (power, voltage, temp, etc.).

Transport, Storage, and Disposal

Instructions for handling, storing, and disposing of the control unit.

Technical Assistance and Spare Parts

Information on using authorized parts and seeking technical support.

EC Declaration of Conformity

Manufacturer and Product Identification

Details manufacturer, product type, and compliance declarations.

Compliance with Directives and Standards

Lists directives (EMC, MD) and harmonized standards the product complies with.