English – 7
2
Before proceeding with installation, check the installation dimensions (Fig. 3):
338 mm
205
mm
420
mm
1030 mm
314 mm
320
mm
205
mm
1000 mm
280
mm
286 mm
178
mm
1000 mm
3
WIDE S WIDE M WIDE L
To install the barrier, proceed as described below:
01. Establish the installation position of the
various system components (e.g. Fig. 2):
- If the base does not exist, start from step
02
- If the base exists, start from step 06
02. Dig the foundation ditch and prepare the
tubes for the electrical cables: see Table 3
for the type of cables (Section 4)