EasyManua.ls Logo

Nice WIDES

Default Icon
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English – 8
03. Secure the 4 anchors to the foundation
plate with one nut above and one below
The lower nut must be screwed up
to the end of the thread
04. Cast the concrete to secure the founda-
tion plate
Before the concrete hardens, make
sure the foundation plate is perfectly
level
05. Wait until the concrete hardens (usually at
least two weeks) and then remove the 4
upper nuts of the anchors
06. Fixing the barrier mechanism cabinet
a/b - unscrew the screws and remove the
cover
c/d - remove the cabinet door
a
b
c
d
e/f - position the cabinet and trace the xing points of the slots
g - drill these points on the support surface
h - insert 4 expansion anchors (not supplied)
i - set the cabinet and block it in position with the nuts and washers (not supplied)
e
f
g
i

Related product manuals