Niche Zero - Cleaning Motor Housing and Conical Burrs

13
WARNING: always make sure grinder is o and unplugged when cleaning.
Cleaning the motor housing, bean funnel and wooden parts
• Do not immerse the motor housing or any part of the Niche Zero
in water.
• Never immerse the burrs or burr-sha assembly in water.
• Keep the Niche Zero dry at all mes.
• Do not use abrasive cleaners or scouring pads.
• Wipe the motor housing, power cord and lid with a clean damp cloth.
• Dry with a so microbre cloth.
Cleaning the conical burrs
If the Niche Zero is used frequently, the burrs need to be cleaned regularly
for best performance. Cleaning enables the burrs to achieve the nest,
most consistent grinds possible – which is especially important when
grinding coee for espresso. Foreign objects – like pebbles, staples or
twigs – somemes nd their way into whole bean coee. These objects
may cause the Niche Zero to jam. If this happens, follow the burr cleaning
procedure to remove the foreign material. If cleaning with a vacuum
cleaner, please remove springs below outer burr so they do not get lost.
Specialist Cleaning Products
We do not recommend that rice or any other specialist cleaning products
are run through the Niche Zero, as this may damage the burrs. The Niche
Zero is not designed to be cleaned this way.
Care and Cleaning