Nico Technology 7600RF - System Objects

7600RF RF Receiver [Preliminary] User’s Manual
6 System Objects
This chapter describes the LonMark objects implemented in the 7600RF RF
Receiver. For each it states the network variable les used, special
configuration properties, general object properties, response during
modification of the configuration and after a reset, and, if available, further
object properties.
6.1 Node Object
The functionality of the node object is defined in the Application Layer
Guidelines of LonMark Interoperability Association
(
www.lonmark.org).
Network Variables
NV Name NV Type Comment
nviRequest SNVT_obj_request Status request
nvoStatus SNVT_obj_status Status response
nvoAlarm SNVT_alarm Alarm generating
nvoFileDirectory SNVT_address Address of file for parameterization
14
Rev.1.0B