Nico Technology 7600RF - Remote Control Object

7600RF RF Receiver [Preliminary] User’s Manual
6.2 Remote Control Object
Network Variables
NV Name NV Type Comment
nvoRemoteState
SNVT_state
Single Remote controller’s 1~ 8 button keys state.
nvoRemoteSwitch
SNVT_switch
Last RC button key value (pre-setting at
UCPTswValTable)
Configuration Properties
CP Name Comment
UCPTswValTable Valid scope: swValue[0] ~ [7]
swValue for Single Remote Control button key value
mapping when received key 1~8 on Remote controller.
15
Rev.1.0B