Nidec Unidrive M700 - Page 125

SI-Ethernet User Guide 125
Issue: 3
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started
Parameters
Key features
and Protocols
PC Tools
Applications
Security Diagnostics
Glossary of
terms
Index
S.22.023 Output mapping parameter 23
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.22.024 Output mapping parameter 24
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.22.025 Output mapping parameter 25
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.22.026 Output mapping parameter 26
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU