4 Transport, storage and disposal
13/23 OPERATING INSTRUCTIONS FOR METAL SOLENOID-VALVES Index: 0
4 Transport, storage and disposal
4.1 Unpacking
§ On receipt of the armature, unpack it, check it for signs of transport damage and ensure that
it is complete.
§ Transport damage or missing components must be reported to the manufacturer
immediately.
§ Make sure that the type label information matches the order and design data.
§ When installing the product, dispose of the packaging material in accordance with the
applicable local regulations.
4.2 Transport
§ Wherever possible, transport the valve in the original packaging
§ Lift the valve by hand for transport purposes (see data sheet for weight information)
4.3 Storage
Improper storage can cause damage to property
Store the valve properly.
You must ensure that the storage location fulfils the necessary conditions, such as:
§ Dry
§ Frost-free
§ Free from vibrations
§ No direct sunlight
§ Storage temperature range +10°C to +50°C
4.4 Disposal
The valve must be disposed of in accordance with the applicable local regulations.
Contamination
Plastic components may be contaminated by toxic or radioactive
media to such an extent that cleaning is not sufficient.
Danger of poisoning and environmental damage from the medium
During all work on the armature, wear personal protective
equipment.
Prior to disposing of the valve, contain any leaking medium and
dispose of it separately in accordance with the applicable local
regulations. Medium residues in the armature must be neutralised.
Dismantle plastic parts and dispose of them in accordance with the
applicable local regulations.
To Next Page
Loading...