Why is there no picture on my Night Owl CM-DP2BK-B?
If there is no picture displayed from your camera, the camera cables might be loose or disconnected. Check the camera video cable and its connections. Disconnect and then reconnect the cable at both the system and the camera. You might also try moving the camera to another channel or using a different cable.
What to do if my Night Owl Security System is not receiving power?
If your Night Owl Security System isn't powering up, it could be due to a loose or unplugged power adapter cable. Ensure all cables are correctly connected, and the power adapter is securely connected to the back of the unit. If the system still doesn't receive power, and the LED indicators are off, check the power source. If connected to a power bar or surge protector, bypass it and plug directly into the wall outlet. Confirm the outlet has power by testing it with another device, like a phone charger, or try another outlet.
What to do if my Night Owl CM-DP2BK-B mouse is not detected?
If your mouse isn't detected by the system, ensure the mouse cable is firmly connected to the USB Mouse port on the front panel. If that doesn't work, power off the system by disconnecting the power cable, then firmly connect the mouse to the USB Mouse port. Finally, reconnect the power cable to the DC 19V port on the rear panel to reset the system.
How to fix a full hard drive on Night Owl CM-DP2BK-B?
If your hard drive is full and the system has stopped recording, the overwrite function may not be enabled. To resolve this, go to the Menu, then HDD, and ensure that Overwrite is set to Auto. This will allow the system to continue recording by overwriting older footage.
General| Model Number | CM-DP2BK-B |
|---|---|
| Night Vision | Yes |
| Two-Way Audio | Yes |
| Weather Resistance | Yes |
| Resolution | 1080p |
| Connectivity | Wireless |
| Power Source | Battery |
| Compatibility | Works with Night Owl security systems |
Get the app from the App Store or Google Play and create an account.
Step-by-step guide to connecting DVR, cameras, and accessories.
Configure DVR settings like language, time zone, and resolution.
Instructions for physically mounting and connecting cameras to the system.
The default screen showing all camera feeds, customizable by view mode.
Instructions for formatting drives to FAT32/ExFat for backup.
Steps to select recordings, choose destination, and perform the backup.
Set recording triggers, motion detection, human detection, and push notifications.
To Next Page
