Nikko Gamma I - Output Level

i
EXPLANATION
FOR
FUNCTION
OPERATION
POWER
To
turn
the
tuner
on
and
off.
OUTPUT LEVEL
This
control
determines
the
output
level
of
the
tuner.
IF BAND
This
switch
controls
the
selectivity
of
the
IF
band.
When
the
signal
being
received
is
disturbed
by
nearby
stations,
press
this
switch
to
NARROW
position
for
elimination
of
interference.
HI-BLEND
Press
this
switch
to
eliminate
high
frequency
noise
from
incoming
signals.
MODE
This
switch
is
used
to
select
the
mode
of
reception.
When
it
is
set
to
MONO
position,
FM
reception
is
heard
in
monaural
and
the
Stereo
Indicator
lamp
will
be
off.
This
switch
also
functions
as
a
muting
switch.
When
selecting
stations,
set
the
switch
to
STEREO
and
interstation
noise
will
be
eliminated.
An indicating-lamp will tight when the switch is in the
STEREO position. Press this switch to MONO position
for stations with weak signals.
SIGNAL METER
This meter indicates the signal strength of the FM
station being received.
TUNING METER
This meter is used for accurate FM tuning. Turn the
tuning knob to the desired station until the TUNING
meter indicates the “‘center’’ position. At the same
time,
the
SIGNAL
meter
will
deflect
maximum.
STEREO INDICATOR
This lamp will light when stereo reception is tuned
accurately.
TUNING KNOB
Turn this knob to select the desired station. Observe
both SIGNAL and TUNING meters for accurate
readings.